Share.

11 Comments

  1. Glad-Audience9131 on

    since you use an adapter from IS to post mount, i don’t think a few spacers are a problem

  2. MaxHeadroom69420 on

    Not really any different than using conical washers instead. If anything just makes it harder to align the brake.

  3. No, I’d never run Avid brakes on my bike (again).

    Oh, you meant the spacers. Yeah, I’d probably do that.

  4. Weary-Clerk5112 on

    Yeah thanks guys I also tried to bleed the brake and after a few pumps it quickly lost pressure I guess I just get the correct adapter + brake combo

  5. two_wheels_bueno on

    Yes, I’m going to have to as my rear pads miss half the rotor, so the height of the spacer to the caliper is totally off, and I only have half the braking power, etc. I’m glad to see this solution today actually!

  6. Dangerous_Mango_3637 on

    REPLACE THOSE BRAKES! The Elixirs are death traps at this point. They will 100% fail on you mid ride.

    The Magura adapters will work fine with most modern brakes.

  7. A_SingleSpeeder on

    Elixer is the worst brake I’ve ever used so no, I’d never do that again. I switched to Shimano years ago and never looked back. So easy to do a brake bleed or just top off the fluid and they just work.

Leave A Reply