Hello I have the canyon aeroad cf slx 8 with the sram force e1 and zipp 303. Unfortunately the drivetrain seems in some gears noisy. I tried to fix with microadjust but couldn’t fully remove the sounds. Chain is freshly waxed.
Any suggestions for the microadjust value?
by wolverine1882
4 Comments
Not really, the upper pulley wheel just needs to be below the cog. Check also the B-screw gap. There’s a tool for it and it should be in the box. Waxed chains can also take some time to smooth in.
If you want a noiseless drivetrain, use oil. Wax is always gonna be louder.
Check if chain is in right position.. it happened to me after waxing, I’ve put the chain upside down. ( it really becomes noisy as F.. and shifts really bad)
SRAM has only one sided chain direction versus Shimano.
So the rounded sided towards the gears.
Which gears?