I recently got this Caloi bike and noticed that the brakes aren't 100%, but I have absolutely no idea how to adjust them.
Can anyone help me?
by 7b3-abys
I recently got this Caloi bike and noticed that the brakes aren't 100%, but I have absolutely no idea how to adjust them.
Can anyone help me?
by 7b3-abys
4 Comments
Weinmann Veinqueur brakes are pretty good brakes so well worth looking after, This video will show you how
https://youtu.be/iJeYSKUI-6A?si=WSr6a7INdUjAV8b7
https://preview.redd.it/51jzxh5qsm7g1.jpeg?width=1440&format=pjpg&auto=webp&s=55d5da452f0e8ef357efaa49638d50d50c7b2e25
Primary cable tension is adjusted by pulling cable through the pinch bolt (red). You can also tune return spring tension/lube pivots (blue)
The brake is not assembled properly. There is a nub with a plastic tip on it on the back side of the left arm. That needs to be in the grove on the right arm. Then you can properly tension the cable.
The y shaped piece at the top. The top bolt needs to be loosened, and the cable pulled thru some. Not very user friendly design. Takes some practice.