You’re two .7mm spacers from safety and likely a straighter chainline
Alextebear on
If you have omniums def don’t put a spacer.
Standard-Platform-96 on
ALU: spacer
Steel: rubber mallet.
gabemarky on
Get a bb with a longer spindle
ayyyyy on
Do not use a spacer. You should almost never use a spacer. Disregard all advice from amateurs who say to use a spacer.
You can crimp the chainstay to provide a bit more clearance but the reality is that the frame was not designed for 144mm BCD cranks. Use 130mm BCD road cranks and you’ll be fine.
MurkyConversation114 on
your frame is steel or alu?
NotAstrl on
oooohhh i had the same issue lol, i just let the paint grind away and it just carved its own path
Sufficient_Spite_712 on
Wait what’s wrong with a spacer? The bottom bracket should come with them For the chain line
Brave-Flow1035 on
This would drive me crazy!! I’d just get new cranks and save the Miche’s for another bike or sell them.
Or, you could always file down the edges of the spider near the chainring bolts.
JK do not do that 🤣
AVRGgamer_ on
Are you using miches bottom bracket? They like their proprietary parts over there.
12 Comments
spacer
You’re two .7mm spacers from safety and likely a straighter chainline
If you have omniums def don’t put a spacer.
ALU: spacer
Steel: rubber mallet.
Get a bb with a longer spindle
Do not use a spacer. You should almost never use a spacer. Disregard all advice from amateurs who say to use a spacer.
You can crimp the chainstay to provide a bit more clearance but the reality is that the frame was not designed for 144mm BCD cranks. Use 130mm BCD road cranks and you’ll be fine.
your frame is steel or alu?
oooohhh i had the same issue lol, i just let the paint grind away and it just carved its own path
Wait what’s wrong with a spacer? The bottom bracket should come with them For the chain line
This would drive me crazy!! I’d just get new cranks and save the Miche’s for another bike or sell them.
Or, you could always file down the edges of the spider near the chainring bolts.
JK do not do that 🤣
Are you using miches bottom bracket? They like their proprietary parts over there.
I’d still keep the Pake