if you have a local bike kitchen or diy space, id just experiment with drilling a bunch of holes in scrap metal bracket looking things till i got tension and solidity. sick rack
uwntsumfuq on
Dude thats sick, is there not a bolt on your forks (about the same point as your nipples) that you could get some 3-8mm thick metal dowel and bending it to a similar u shape as the other support, and then put a small loop on the end of each leg to attach the bolt too
im_zewalrus on
Damn that slaps
Acrobatic-Position74 on
Get some P or C clamps and run some bolts through the board.
It’s an awesome idea! I always end up with a cut down milk crate.
If this doesn’t work, just get a piece of aluminum, bend it around and screw it down
pocket_nick on
Just get some Adel clamps from your local hardware store in the appropriate diameter and secure to the deck using screws and lock nuts through the existing holes.
hongos_me_gusta on
where’s your brakes?!
haha, joking, you do you.
sick rack, I’ve been looking for front rack, randonneur bag, or handlebar bag inspiration or ideas. I promise not to copy you, but this is a great & clever recycle.
perhaps considering hose clamps instead of zip ties? or just use many more zip ties because those lonely two zip ties will eventually break.
9 Comments
if you have a local bike kitchen or diy space, id just experiment with drilling a bunch of holes in scrap metal bracket looking things till i got tension and solidity. sick rack
Dude thats sick, is there not a bolt on your forks (about the same point as your nipples) that you could get some 3-8mm thick metal dowel and bending it to a similar u shape as the other support, and then put a small loop on the end of each leg to attach the bolt too
Damn that slaps
Get some P or C clamps and run some bolts through the board.
It’s an awesome idea! I always end up with a cut down milk crate.
Here you go. One solution here: [https://bikepacking.com/gear/skateboard-front-rack/](https://bikepacking.com/gear/skateboard-front-rack/)
https://www.performancebike.com/salsa-8mm-strut-mount-kit-rk8032/p1161641
If this doesn’t work, just get a piece of aluminum, bend it around and screw it down
Just get some Adel clamps from your local hardware store in the appropriate diameter and secure to the deck using screws and lock nuts through the existing holes.
where’s your brakes?!
haha, joking, you do you.
sick rack, I’ve been looking for front rack, randonneur bag, or handlebar bag inspiration or ideas. I promise not to copy you, but this is a great & clever recycle.
perhaps considering hose clamps instead of zip ties? or just use many more zip ties because those lonely two zip ties will eventually break.
Now that’s a vibeš«”