Yep, just use quite literally anything to pick it out.
Antti5 on
Very common.
Either dig it out or if it’s too tight break the stone. Hammer and a nail should work
Ol_Herr on
If it’s too stuck take a chisel or screwdriver and a hammer and try smashing it.
You can also use a dremel and grind it out.
Automatic_Leg_2274 on
All the time. Use something pokey to pry it out or break it out with a pokey and hammer.
theservman on
A pick or an awl has worked for me. Are you planning to take the cleats off the shoes though?
ande9393 on
Use a pick to pull it out or a center punch to break it up
Black_CatLounge on
Punch + hammer
caaper on
Give it your awl
syntheticassault on
I just ignore it and it will fall out eventually.
Leemesee on
Every spring I adjust my cycling shoes and have to get things out. This one particularly looks nasty, but you will find a way.
beannnnnnnnnn22 on
Use a small nail to pry it out. Happens all the time.
mad_world on
All the time. Just leave it until you need to adjust or remove, it may come out on its own. You can pick it out when you need to. I use an old broken spoke that I sharpened on the grinder.
stupid_cat_face on
Yes… I think I used some lubricant and a knife and pin… I had to pick at it quite a bit
Camerongary on
Whack the shoe on the ground and see if that dislodges it. If not, pick it out.
SspeshalK on
Once you get it out if you want to you can melt some wax and fill the head – then next time you need to remove the bolt the wax comes out easily and there shouldn’t be a stone.
Neicopay on
Used a needle to get it out.
labyorj on
Is it loose?
BD59 on
Dental pick and pry it out.
To prevent this in the future, fill the bolt recess with some silicone caulk. It’s a whole lot easier to pick out later than a stone, and protects the recess from getting deformed from those little stones.
Manccookie on
Yeah, it happens. Try getting it out?
dorfmatratze69 on
Hab auch gerade das Problem 😂
Wollte ihn dann bei Bedarf raus popeln oder mit einem Meißel bearbeiten
Beluga-ga-ga-ga-ga on
All the time. Even when I’m riding in the city and nowhere near dirt. Dig it out with point and metal.
Edit:
Don’t bother digging it out until you actually need to replace the cleats, as it’ll just happen again.
Full_Security7780 on
Oh yeah. That’s a frequent occurrence. I use a mechanic’s pick to pry it out.
bell1975 on
Don’t tell my wife but there’s a metal skewer for testing if cakes are cooked that I use for this.
It’s also great for getting all the sheep and cow poo out of the soles of my cycling shoes!
Wonderful-Newt2181 on
I’d use the thing on my swiss army knife that’s for getting stones out of a horse hoof. I think you have discovered the modern use for it.
sebnukem on
Yes, and it can only bother me when it’s time to replace the cleats, which has never happened because the stone will be gone.
ArmIndependent1190 on
Dremmel a groove and use a screwdriver worst case scenario
th3_eradicator on
Yup, use your multi tool to pick it out. Happens all the time.
TickingTheMoments on
Pick it out and if it doesn’t work, find a nail that is smaller than the head and just give it a couple taps
PotentialPea2419 on
Plenty of times, just use a pick, even a tooth flosser would probably work.
TheDaysComeAndGone on
Happens all the time.
Use your smallest hex key to pry it out. Or a needle. Or you can try to hammer it.
owlpellet on
Remove one bolt, then see if you can get the whole cleat to rotate a little, loosening the other bolt. Then spin it out gently.
thatguywithatoaster on
Maybe I’m just a caveman but we just had a cheap set of Allen keys that we didn’t mind trashing. Set it over the stone and hit it with a mallet. Cleats usually aren’t torqued to hell anyways
34 Comments
Yep, just use quite literally anything to pick it out.
Very common.
Either dig it out or if it’s too tight break the stone. Hammer and a nail should work
If it’s too stuck take a chisel or screwdriver and a hammer and try smashing it.
You can also use a dremel and grind it out.
All the time. Use something pokey to pry it out or break it out with a pokey and hammer.
A pick or an awl has worked for me. Are you planning to take the cleats off the shoes though?
Use a pick to pull it out or a center punch to break it up
Punch + hammer
Give it your awl
I just ignore it and it will fall out eventually.
Every spring I adjust my cycling shoes and have to get things out. This one particularly looks nasty, but you will find a way.
Use a small nail to pry it out. Happens all the time.
All the time. Just leave it until you need to adjust or remove, it may come out on its own. You can pick it out when you need to. I use an old broken spoke that I sharpened on the grinder.
Yes… I think I used some lubricant and a knife and pin… I had to pick at it quite a bit
Whack the shoe on the ground and see if that dislodges it. If not, pick it out.
Once you get it out if you want to you can melt some wax and fill the head – then next time you need to remove the bolt the wax comes out easily and there shouldn’t be a stone.
Used a needle to get it out.
Is it loose?
Dental pick and pry it out.
To prevent this in the future, fill the bolt recess with some silicone caulk. It’s a whole lot easier to pick out later than a stone, and protects the recess from getting deformed from those little stones.
Yeah, it happens. Try getting it out?
Hab auch gerade das Problem 😂
Wollte ihn dann bei Bedarf raus popeln oder mit einem Meißel bearbeiten
All the time. Even when I’m riding in the city and nowhere near dirt. Dig it out with point and metal.
Edit:
Don’t bother digging it out until you actually need to replace the cleats, as it’ll just happen again.
Oh yeah. That’s a frequent occurrence. I use a mechanic’s pick to pry it out.
Don’t tell my wife but there’s a metal skewer for testing if cakes are cooked that I use for this.
It’s also great for getting all the sheep and cow poo out of the soles of my cycling shoes!
I’d use the thing on my swiss army knife that’s for getting stones out of a horse hoof. I think you have discovered the modern use for it.
Yes, and it can only bother me when it’s time to replace the cleats, which has never happened because the stone will be gone.
Dremmel a groove and use a screwdriver worst case scenario
Yup, use your multi tool to pick it out. Happens all the time.
Pick it out and if it doesn’t work, find a nail that is smaller than the head and just give it a couple taps
Plenty of times, just use a pick, even a tooth flosser would probably work.
Happens all the time.
Use your smallest hex key to pry it out. Or a needle. Or you can try to hammer it.
Remove one bolt, then see if you can get the whole cleat to rotate a little, loosening the other bolt. Then spin it out gently.
Maybe I’m just a caveman but we just had a cheap set of Allen keys that we didn’t mind trashing. Set it over the stone and hit it with a mallet. Cleats usually aren’t torqued to hell anyways
For me the entire system is filled with mud.
Just enough space to clip in
Lol yes, clap them really hard together