I'm trying to screw my bolt back in and I can get the threaded part of the bolt through but it eventually gets stuck and I can't put the bolt in anymore. I thought it was a grease issue so I bought some ppl-1 but it's still not working. I'm able to use basically no force to get the threaded part of the bolt through but once it's stuck it isn't moving even with a decent amount of force. I try snacking it see if I can push it through but it's not working. Have I potentially stripped the threads somehow? I've gotten the bolt through before several times no issues.
by Late-Reception-2897
5 Comments
Try putting it in the other side of the fork.
ya sure you don’t put the thru axle in on the NDS?
if the side of the fork your thru axle is currently attached to has the threads then you are inserting in on the wrong side of the fork
Only one side is threaded. Put it through the other way.
I’m very dumb. I put my bike upside down so the bolt had to go through the opposite way I took it off since I took it off right side up.
https://preview.redd.it/fzqcomqf95og1.jpeg?width=3000&format=pjpg&auto=webp&s=99de0a5ad2ceb96e0b20681d7be02fa0b3c88bfe
All back together :).
put it in from the other side, lol.