Hi everyone! I recently realized that the pressure in my Fox 32 Rhythm fork was too high for my weight. At the time, I didn't have a dedicated bike suspension pump, so I released some pressure by pressing the valve button with my finger, but it lost almost all its pressure and I couldn't use it. Then, I finally bought my suspension pump and adjusted the sag for my weight, using 75 psi. However, I noticed that my fork lost a lot of travel; it went from 120mm to 95mm, a loss of 25mm. For a moment, I thought I hadn't put enough pressure in the fork, but when I put in 140 psi to test it, the fork only had 100mm of travel instead of the original 120mm. Please help! I've attached two before and after photos.
by NickVHSRetro
1 Comment
It got sucked down into its travel try pulling the fork up and equalizing the pressure also when adding air cycle the suspension every 15-20 psi (push down on handlebars and move suspension)
https://youtu.be/Y-UfHFI4-MM?si=W09OQcaq4LQO6dyv