My new ride! 1993 Bianchi Project 3 build

I got inspired from this sub to build my own bike. I found an old Bianchi Project 3 in pretty rough shape, so tore it down, and built it up from the frame with some old and new parts. The frame itself is really nice Tange infinity double-butted cromo. I'm including some details below for those who might find one of these frames.

Drivetrain:

• I found a replacement triple Sugino crankset (24-36-46) and installed a new Tange alloy bottom bracket with spindle length of 127mm. Even with that spindle length, the smallest chain ring is very close to the frame, but clears fine.
• Rear is a Shimano 8-speed cassette 11-32
• Kept the original Exage derailers

Wheels:

• I had some new wheels built by Bicycle Wheel Warehouse – they have a pretty good deal on Sun Rhyno lite 700C rims with generic Shimano hubs
• Tires are Schwalbe G-one Allround 700×45. Actual measurement is only 41mm unfortunately. I was hoping for 45-47 range.

Cockpit:

• I "downgraded" to some old Deore 6-speed friction shift levers
• Brake levers are new Tektro FL540
• Took some handlebars and grips from an '80s Raleigh mountain bike
• Splurged on the Nitto stem and brake cable holder

Other:

• Brakes are new Shimano altus cantis – really responsive braking!
• Seatpost is a generic alloy 26.4mm post
• Saddle is one from the parts bin for now.