You could also get Huldit lock holder to move the lock to the area next to your stem and then get regular bottle holders
geneocide on
lock in the belt is common around here. maybe that works?
Delli-paper on
Tilt lock holder a bit to the side and slide it as far forwards as possible. You’ll have full use of that inner section, though you’ll only have access from one side.
You can search for “bike bottle cage adapter” to find little brackets that let you mount a bottle cage lower than the holes in the frame. Probably cost you $5-10 and then you just use a standard bottle cage and bottle.
_squik on
I feel like if you just moved the lock mount to the vertical tube then you’d have unobstructed used of the front bottle cage mount, no?
BD59 on
Side loading cages and a small 20oz bottle on the seat tube. There’s also adapters available that relocate the cage a bit lower.
less_than_nick on
How does that litelock mount work? does it rattle around much?
bearlover1954 on
Move the lock and mount to the seat tube…you’ll get room for 2 bottle cages.
calderholbrook on
if it was me i would just store the lock elsewhere
noodleexchange on
The lock doesn’t have to be within the triangle: on the seat tube it can point backwards for instance. Get creative!
Bike_Mechanic_Man on
I put the lock on the vertical tube and got a simple extension for the bottle cage to move it up a little. It depends on your bike’s geometry if this will work.
arterialturns on
It’s kind of hard to describe, but I have mine mounted below the seat post kind of parallel with the frame of the bike because I have a larger one and it doesn’t really fit anywhere else even where you have yours. It seems to work out pretty good. It can be an adjustment because basically I’m pedaling with it along my inner thigh but it doesn’t bother me any.
16 Comments
Fidlock
Move lock to seat tube, or ditch the lock mount
Slide the lock forward would that give you room
You could also get Huldit lock holder to move the lock to the area next to your stem and then get regular bottle holders
lock in the belt is common around here. maybe that works?
Tilt lock holder a bit to the side and slide it as far forwards as possible. You’ll have full use of that inner section, though you’ll only have access from one side.
[https://www.amazon.com/dp/B08TM6VJJ7](https://www.amazon.com/dp/B08TM6VJJ7)
You can search for “bike bottle cage adapter” to find little brackets that let you mount a bottle cage lower than the holes in the frame. Probably cost you $5-10 and then you just use a standard bottle cage and bottle.
I feel like if you just moved the lock mount to the vertical tube then you’d have unobstructed used of the front bottle cage mount, no?
Side loading cages and a small 20oz bottle on the seat tube. There’s also adapters available that relocate the cage a bit lower.
How does that litelock mount work? does it rattle around much?
Move the lock and mount to the seat tube…you’ll get room for 2 bottle cages.
if it was me i would just store the lock elsewhere
The lock doesn’t have to be within the triangle: on the seat tube it can point backwards for instance. Get creative!
I put the lock on the vertical tube and got a simple extension for the bottle cage to move it up a little. It depends on your bike’s geometry if this will work.
It’s kind of hard to describe, but I have mine mounted below the seat post kind of parallel with the frame of the bike because I have a larger one and it doesn’t really fit anywhere else even where you have yours. It seems to work out pretty good. It can be an adjustment because basically I’m pedaling with it along my inner thigh but it doesn’t bother me any.