Cat Hole Concierge – How to Fork Mount Your Poo Trowel

Drill holes in the trowel handle at 64mm offset. Holes need to clear the head of whatever mounting screws you’re using.

Use a small round file to “teardrop” the holes for an M5 screw diameter.

Install screws into fork leg mounts, leaving enough exposed thread under the head to snugly hang your trowel. A rubber or foam washer may be used to preload the trowel against the screw heads and provide spacing away from the fork leg.

Slip trowel over screw heads and slide downward to engage keyholes and lock into position. Adjust screws as-required to tailor fit.

Ride out into the wilderness and poop in a hole.