Share.

12 Comments

  1. Foreign_Curve_494 on

    Clean the rust off and rewax. Unless you plan on riding a lot in wet conditions, in which case I’d suggest a wet lube. Doesn’t need replacing unless it’s elongated 

  2. The rust isn’t really harmful. Wipe it away, I recommend some alcohol and a clean rag, and rewax.

    You can avoid this by wiping the chain dry after a wet ride. After a ride in wet and salty conditions, rinse the chain with water before that.

  3. CopPornWithPopCorn on

    Wax will always wash off in the rain. I know waxing is fashionable right now, but oil based products are generally much more robust lubricants. It’s a better choice if you have a bike that needs to be ridden in inclement weather.

  4. I don’t wax my chains, but if I do get caught in rain and everything is soaking wet, when I get home, even if I don’t clean and re-lube the chain right away, I always run the chain through a rag for at least 10-15 revolutions and then blow off the moisture out of every link with a compressor. If you just leave it, that surface rust will happen every time.
    As others have said, clean (ultrasonic, I would assume in your case?) and re-wax, should be fine.

  5. Head-Kale-5165 on

    Can you say more about your application of the wax? I.e., a description of the waxing process? I’ve been waxing my chains for a long time and ride in the rain, I’ve never had anything like this happen.

  6. Wax it as usual but keep a towel with some kind of light spray oil in the garage or Basement for when you get home to coat the chain in a thin layer of oil… You can Wax as much as you want but the naked chain will ALWAYS rust without at least something to keep moisture away from the bare metal! And that something isn’t wax

  7. Michael_of_Derry on

    I had the same thing. I’m going to experiment by mixing the paraffin wax with beeswax and some other additives to see if I can make it tackier and less brittle.

Leave A Reply