You should not be screwing both sides in… screw in the side in the direction you want the brake to move and loosen the side from where you want the brake to move away from.
Also, make sure your wheel is centered.
With the bike on the ground and some weight over the handlebars. release both sides at the same time. then tighten them again.
2 Comments
First step is the small screws sticking out to the sides. Here for more info, the section on Centering. https://youtu.be/XMa9UqY9obk?si=HGjA6r41OL8_CtGn
You should not be screwing both sides in… screw in the side in the direction you want the brake to move and loosen the side from where you want the brake to move away from.
Also, make sure your wheel is centered.
With the bike on the ground and some weight over the handlebars. release both sides at the same time. then tighten them again.