Got this bike for cheap, I can’t figure out how to remove this last part. When I try to screw it out, just spins over and over (inside). Thanks for anyone that knows.
by NarwhalPerfect
Got this bike for cheap, I can’t figure out how to remove this last part. When I try to screw it out, just spins over and over (inside). Thanks for anyone that knows.
by NarwhalPerfect
7 Comments
You need to remove the bb Cup. It is a Standard tool you need anyways If you wanna build up the frame.
https://preview.redd.it/x3jhhy7ucp5e1.jpeg?width=1080&format=pjpg&auto=webp&s=44669949632adccaf0e5d82feb7a4f999b7d64ae
Is it being held there by a bottom bracket cup?
Are you securing the non-drive side? If not, it’s gonna spin
I don’t understand this picture and really want to see what’s going on
wait, if the other crank arm is not installed, what’s even holding it on?
Maybe the axle is seized inside of the bb.
Could you post a picture of the other side of the frame?
Looks like its held in by the bb. Make sure you spin the right way when you do this. put the tool into a vice. Set the frame on the tool and push on the end of the frame. And push the bb down or use a qr and some washers to clamp it. If that doesn’t work your screwed
Weird somone installed a crank spider at the bottom bracket.
You need a bottom bracket tool.
You turn clockwise to loosen it. Should be easy, if not use a hammer on the breaker bar or pedal wrench. Pedro’s has one that attaches to their pedal wrench.
I have both. If you have a impact driver use that.