IDK what causes the issue. It's a quick release and after i take it out an put it back straight then close the lever it's ok. But after using the front brake it just tilts to the left. The disc doesn't look to be bent. Also pushed back both pistons before leaving home and came back like this. The braked in question are some Tektro Hydraulic brakes (if necessary i will look them up).
So, what could be the problem? Is it the wheel/rim or maybe something else? I checked the spokes and they don't seem to be that soft. I want some advice if possible before taking it to a shop. Maybe and hopefully it won't even be necessary.
by DukviL
4 Comments
Axle mounted crooked in the fork or axle itself is crooked.
First is easy, loosen the wheele, push it into the fork and tighten again.
Second, not so easy. I did it by impropperly readjusting the bearings. Bring wheel to bikeshop for fixing.
Are the 2 cone shaped springs pointing with the small end to the middle?
You need to put a bit more force into clamping it down. Just turn this little nut on the other side of the quick release to adjust the offset.
Open the QR, put your body weight torso-on-handlebar, tighten the QR in that bodyweight leaning pose, get off from the handlebar.