Yes, there is something wrong with your bike fit if you keep sliding forward. The saddle in general should be level or nose down ussually. Th only time I’ve ever seen a leaned back saddle is extreme downhill riding.
root_fifth_octave on
Yeah. Too much reach to the bars, maybe?
joepublicschmoe on
perhaps look for a saddle with a flatter profile without that deep dip in the middle. That way you can sit your sitbones on the wings of the saddle without sliding forward when the saddle is level.
c0nsumer on
Nthing that something is wrong with your bike fit. Frame may be way too big.
Also, what’s up with that paint. Did you sand the paint off a carbon frame?
EDIT: Looking at this post of yours (https://www.reddit.com/r/bicycling/comments/1d2q81p/flat_pedal_gang/#lightbox) that’s a lot of saddle-bar drop. I suspect that the bike is a bit long for you, and by tipping the saddle up you’re basically wedging yourself in place with your junk because the reach is too long.
hodaddio on
I say make it a comfortable bicycle for YOU. Whatever that means. Peace!
Spare_Blacksmith_816 on
Why didn’t you finish screwing in the top of your bookshelf?
Impossible_Comment49 on
You are most likely compensating for something.
From top of my head:
1. Bike is too small, you are positioned too much forward (please note the 3rd point**)
2. The saddle doesn’t fit you as its rear end is tilted forward (check flat saddles),
3. Some other comment suggest your reach is too long, I would concur as you would naturally be pushed to sit on the front of the seat which is up in the air, I expect that you sit on very back end of the seat, which is actually more level from the pic perspective
Please sent us a vid or pic while you’re on the bike.
jeffbell on
I’ve seen far worse.
I’m not saying it’s great, just that it’s not extreme.
frosty024 on
Little bit high
Acceptable_Aspect969 on
That is a rim brake frame but there is no brake?
wildcherrymatt84 on
Ok here’s what you do, put on Dunston Checks In and while watching it, attach the top of the bookshelf to the rest of the shelf, then tip the seat down so it is flat. Then sit on bike (while continuing to watch Dunston Checks In) and pay attention to how much you lean forward when putting your hands on your handlebars. If you feel a lot of weight on your hands you are leaning on them too much. A key part of cycling is core strength, when we don’t have great core strength we put more weight on our hands and we shouldn’t. Then sit back and finish Dunston Checks In.
tommyhateseveryone on
You’re sliding forward because your seat is set too forward on the bike. Get a setback post so you can better cantilever your body weight over the front. Zero offset posts like the one you have are ideal if you have an especially lightweight upper body and strong core, or you have a particular kind of saddle where the seating position is farther back (selle smp for example)
12 Comments
Yes, there is something wrong with your bike fit if you keep sliding forward. The saddle in general should be level or nose down ussually. Th only time I’ve ever seen a leaned back saddle is extreme downhill riding.
Yeah. Too much reach to the bars, maybe?
perhaps look for a saddle with a flatter profile without that deep dip in the middle. That way you can sit your sitbones on the wings of the saddle without sliding forward when the saddle is level.
Nthing that something is wrong with your bike fit. Frame may be way too big.
Also, what’s up with that paint. Did you sand the paint off a carbon frame?
EDIT: Looking at this post of yours (https://www.reddit.com/r/bicycling/comments/1d2q81p/flat_pedal_gang/#lightbox) that’s a lot of saddle-bar drop. I suspect that the bike is a bit long for you, and by tipping the saddle up you’re basically wedging yourself in place with your junk because the reach is too long.
I say make it a comfortable bicycle for YOU. Whatever that means. Peace!
Why didn’t you finish screwing in the top of your bookshelf?
You are most likely compensating for something.
From top of my head:
1. Bike is too small, you are positioned too much forward (please note the 3rd point**)
2. The saddle doesn’t fit you as its rear end is tilted forward (check flat saddles),
3. Some other comment suggest your reach is too long, I would concur as you would naturally be pushed to sit on the front of the seat which is up in the air, I expect that you sit on very back end of the seat, which is actually more level from the pic perspective
Please sent us a vid or pic while you’re on the bike.
I’ve seen far worse.
I’m not saying it’s great, just that it’s not extreme.
Little bit high
That is a rim brake frame but there is no brake?
Ok here’s what you do, put on Dunston Checks In and while watching it, attach the top of the bookshelf to the rest of the shelf, then tip the seat down so it is flat. Then sit on bike (while continuing to watch Dunston Checks In) and pay attention to how much you lean forward when putting your hands on your handlebars. If you feel a lot of weight on your hands you are leaning on them too much. A key part of cycling is core strength, when we don’t have great core strength we put more weight on our hands and we shouldn’t. Then sit back and finish Dunston Checks In.
You’re sliding forward because your seat is set too forward on the bike. Get a setback post so you can better cantilever your body weight over the front. Zero offset posts like the one you have are ideal if you have an especially lightweight upper body and strong core, or you have a particular kind of saddle where the seating position is farther back (selle smp for example)