So I just did a 200h service on my Rockshox 35 silver tk air (it was my first fork service ever). The travel of the fork can be changed with spacers (see photo 3). My fork came in 140mm and I wanted to make it 150, so I took out the 20mm spacer and installed a 10mm one. I finished the service according to the official manual and put the fork back together and now it's 160mm for some reason lol. I thought I forgot to put the spacer in, but it's nowhere to be found. Is this cause for concern and should I take the fork apart again and check it or can I just ride it?
by Raijincraft_
1 Comment
Don’t measure from the crown. Bleed all the air. Compress the fork. See how far it can be compressed. And measure from there to full extension.