Hey guys,
with your help I decided on the size (M instead of L with 1,84 / 84 cm – got a 90 mm stem now it is perfect) and got a Grizl CF recently.
Now I have three short questions:
1. I have one of those VCLS seatposts. Can I put that in a maintenance stand? I can’t find any information online or in the manual. If not, where do you clamp your CF Grizl?
2. The cap for the seat post screw hole does not fit. It is too short and too thin. Did I get a wrong part?
3. Or am I missing one? There is another whole in the frame a bit below that seat post screw hole – should that stay open? It seems as if water and dirt can get inside the frame there.
Please see pictures here for questions 2 and 3: [https://imgur.com/a/pOHvqxe](https://imgur.com/a/pOHvqxe)
Thank you!
by mt83n
1 Comment
1. Yes. Just be sensible about how much you crank those jaws.
2. I don’t think the little rubber bungs are designed for the seatpost screw…
3. It should fit in that hole below if I remember correctly from mine.
My 1-by came with the 2 longer plugs to fill the holes for the front derailleur mount. I ended up just putting back the two screws for the derailleur and one of those plugs worked somewhat for the seatpost hex. I say somewhat, because I was lost somewhere between my second ride, two months ago, and today!