Share.

8 Comments

  1. Is that a narrowwide? I’m not sure how they work, I think the wide teeth go into the wide links?

  2. The wide tooth is going into the narrow part of the chain, just lift the chain and shift the chainring over one roller

  3. How old is the chain? Can you check the wear on it?

    ​

    Also, have you checked whether there are any stiff links in that part of the chain?

  4. perfectlycleansliced on

    I had something similar with a bent chainring, but the symptom of this was that the chain would “climb off” at the same point when I rotated the crank.

    I can’t tell if that’s your issue here from the video, unfortunately

Leave A Reply