Anyone got some idea how to remove the freehub from the wheel in this example? It’s a Mavic Ksyrium Elite model maybe from 2005 or so. In the tutorials on youtube the bolt is not rounded and fits a 17 mm wrench but mine is rounded and cant the round 17 wrench kinda is too big…
by Ok-Helicopter-8459
1 Comment
pull out the left hand end cap, you will be able to hold the axle with a 10mm hex key. Use a 5mm hex key to remove the axle stub on the drive side. If there is no removable end cap on the left hand side, hold the axle cone with a cone spanner, 13mm from memory. You can remove the freehub to service it then. The pawls and springs may fall out as you pull the freehub off, so do it carefully over a clean area.