My canyon ultimate SRAM group set makes squiking noises during pedaling, bike is new, around 700Km.
I've oiled and cleaned the chain, greased the seatpost, changed the pedals, changed the cleats, noise is still there.
Noise seems to be coming from the chainring area.
Bike has an integrated quark power meter.
Any ideas, has someone had this issue before?
by just_me_4321
12 Comments
I have the same issue, but with a Endurace. I am suspecting the bottom bracket at this point.
I created a ticket with canyon but they have a response time from 10 to 14 days. Really annoying
Last time I had a squeaky chain on my CF6 I had forgotten to lube my chain & it made a squeaky/crunchy sound when I pedalled.
I also had an experience with squeaking noise after I installed a new pressfit BB on my canyon exceed, especially when I pedaling hard with high torque.
In my case, it disappeared after about 100 km, so I suspect I hadn’t used enough grease when installing the new BB.
Have you checked the derailleur hanger? Check all the bolts on the drivetrain.
Are you sure it‘s not the spring of your pedals? Although you’ve gpt SPD-SL, SPD pedals often have this problem. Oiling the spring gets rid of it.
Seats move and flex, torque on the seat post should be checked. If it calls for carbon paste on the downtube, apply paste on a cleaned post before inserting and torquing to spec
I usually pull off the cranks and chainring, unscrew the chainrings from one another and grease whatever interfaces with one another and regrease anything that’s a little dry looking or feeling.
I also grease what interfaces between the bike>the rear derailleur hanger>rear derailleur.
Just a bit of grease, nothing outrageous.
Canyon has a creaking problem. I just pulled my entire endurance apart trying to chase down the inconsistent noise. It also only happens when pedaling (with and without my shoes). I could not find anything, BB was in good shape, regreased everything and just deal with it.
Can you upload a video?
Weird, I’ve got a similar issue, it’s coming from around the derailleur area and only happens in lower gears. When I got back from a ride the other day I still had it when back pedalling by hand, went to do some other bits, came back and hour later to look into it and it had gone. Usually starts after about 20 minutes into a ride. Planning to strip it tomorrow. It’s a Endurace SLX CF with 105 Di2.
Does it happen when you’re off your seat? If it does not, then it’s your seat post not your bottom bracket. Happened to me earlier this year and I needed to apply carbon paste to fix it.
I had a similar issue but it was more a whistle. Brake pad was riding the disc. Quick fix/alignment got it working.