So installed the 10 angle degree riser first, followed by the 2 other angled risers, and as instructed first screw being the shorter screw and the outermost, furthest screw being the 5mil longer screw, but it protrudes and isn’t flush.
when screwing any of the other screws it was an effort at 4nm to screw in any other screw so wasn’t sure if it was a thread problem. Anyone else had this, or best to try a shorter screw because of this?
by aanon315
2 Comments
It appears you are looking for bike fitting help. Please make sure you post as screenshot of the Canyon size chart for your bike, with your point in it. See [this example](https://imgur.com/a/ALUfXyy)
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/CanyonBikes) if you have any questions or concerns.*
https://preview.redd.it/48a0vxlzmg8h1.jpeg?width=1206&format=pjpg&auto=webp&s=4b99563d749ff1d87e68c5e00372a691a2e69603
For ref what I used