Hi all,
I just received my new Endurace CF 7 SLX with the integrated CP0048 cockpit and noticed that the handlebar/stem and the front wheel are not perfectly aligned. When riding straight, the cockpit is slightly off-center relative to the front wheel.
I know how to adjust a standard stem but I wonder if both screws of the CP0048 have similar functions.
Could someone explain which bolts need to be loosened and adjusted to align the cockpit with the front wheel?
by Ok-Thanks-4564
1 Comment
There are videos on the Canyon app that show the adjustment. The red one is the one that clamps the stem. Loosen this first and then the green.
Line everything up then tighten the green first: this is the pre-tension bolt and only needs to be done to about 2Nm or until there is no play. Then tighten up the red to the torque written on it.