As you can see on the pictures, a part of my disk is not being touch by the pads. But i’m not running any spacer in the front and only an adapter in the back. What can i do to prevent that?
Thanks!
by Training_Ad_2237
As you can see on the pictures, a part of my disk is not being touch by the pads. But i’m not running any spacer in the front and only an adapter in the back. What can i do to prevent that?
Thanks!
by Training_Ad_2237
5 Comments
Are the rotors all the way in? How much space is there between the outer edge of the rotor and the inside of the calliper/the whole of the pad making contact? It might be that the rotor is just deeper than the Mavens, in which case it doesn’t matter.
What size rotor is that?
from what I can see from google image search that actually looks kind of normal for those brakes. which is shabby.
[https://www.singletracks.com/mtb-gear/the-sram-maven-ultimate-brakes-review/](https://www.singletracks.com/mtb-gear/the-sram-maven-ultimate-brakes-review/)
You’re using the wrong adapter on the rear.
The front looks a lot like any other Maven set up but there’s something up with the back, but did you have a 203mm rotor in the back before?