A bit close in my opinion, but on the curas is already tight by default.
Check if each the caliper is centered, or if you have a sticky piston
GoBam on
It looks like your calliper could be on a bit of an angle, with back end (right in this image) pushed towards the disc, as there are visible scoring where the bolt was previously, in the second image.
2 Comments
A bit close in my opinion, but on the curas is already tight by default.
Check if each the caliper is centered, or if you have a sticky piston
It looks like your calliper could be on a bit of an angle, with back end (right in this image) pushed towards the disc, as there are visible scoring where the bolt was previously, in the second image.