I bought a new frame/fork and didn't realize until just now that the front wheel on my old bike is 15mm TA x 100mm. I'm hoping I can adapt my hub, which seems to be a non-series FSA, to the new fork which is 12mm TA x 100. The end caps on the hub right now won't fit into the dropouts on the fork, and when I emailed FSA they claimed the hub is so old that they no longer have documentation on it. So, given that I have no model numbers, I guess this post is in the hopes that someone recognizes the hub and has converted it before? Long shot, I know.
I *think* this might be what I need — I've written to the seller to see if they can give me the measurements of these caps, but no response so far: https://www.ebay.com/itm/187132051869
Couple of of random notes to go with the photos:
-The hub flange is higher on the non drive side
-The current caps seem to be about 27mm in diameter (I don't have good measurement tools handy)
-The current caps seem to be about 15mm deep on the drive side, 20mm on the NDS.
Thanks everyone.
by pete19_86