Hi, I’m struggling finding the right Information about bottom brackets and spacers.
My Frame(Yoeleo R12) has a EVO386 BB shell and i bought the ROTOR PF4624 BB386 BB Steel for it. Shimano cranks with a Q-factor of 146 fits without Problems. Now I wanne use this Crank https://uk.magene.com/gb/power-meters/218-pes-p515-power-meter-set.html with a Q Faktor of 147.
Where to add what Spacer? Which Side? Between Frame and BB or between BB and Crank? Is there a general Guide for BBs and spacers?
I have a 1mm Spacer (24mm inner diameter) that fits between the Crank and the BB. But the sealing of the Bearing turns with the Crank. Is that the intended way?
Thank you
by 7Dennis
1 Comment
Q-Faktor is the width between pedals, the spindle is the same as the Shimano cranks. The PES Chainline is a little different from regular Shimano Road, so you’ll have to adjust the front derailleur accordingly.