I purchased a set (different from the set in the video), and it's not so useful. Then I got a few sets of other brand names. It'd be the best if each has a 1/4 hex shank. But unfortunately, many have SQUARE shanks of different sizes, which makes it very inconvenient.
My boss does this and makes it look so easy.. I still haven't mastered the broken bolt thing yet. vise grips help but only if you have something to bite on.
1. "RYOBI Spiral Screw Extractor Set (5-Piece)" — I used one piece of it, it worked. The thread was worn after being used only once. But it's still OK. I recommend.
2. "CRAFTSMAN CMMT14108 Spiral Screw Extractor" — this I haven't used. It's the same as the Ryobi kind. I recommend.
3. "IRWIN Screw Extractor for Spiral Screws, 5-Piece (53535)" — this I have used — the thread was not so much worn after being used once. This kind seems better than RYOBI and CRAFTSMAN. I recommend.
4. "Irwin Hanson 53702 7/64" Spiral Screw Extractor & Drill Bit Set" — I haven't used it. But I think it's good.
5. "Hanson Irwin 53701 5/64" Spiral Screw Extractor & Drill Bit Set" — I haven't used it. But I think it's good.
6. "12-Piece Screw Extractor Set Easy Out Remover Kit of the B BOSI TOOLS Store". They are totally useless. My don't recommend.
Man, i had your clip playing on repeat in the background as this stubborn bolt was extracted. Im not familiar with the music or even the language but as that bokt came undone it was beautiful 😊
I just learned something here… I know how to extract but like to watch videos….. I’m 31 and just now realizing you can put that extractor bolt right into an air gun?…..
39 Comments
Buy me the chilly wata 🔥
Screws?
我之前买了一套(与视频中不同)，但不好用。因此后来再买了几套其他品牌的。有六角驱动杆的最好，但多数是大小不一的四方形驱动杆，非常不方便。另外，一般这种螺丝只能用一两次，次数多了丝就没了，因此这算是一种消费品，不能称为工具。
I purchased a set (different from the set in the video), and it's not so useful. Then I got a few sets of other brand names. It'd be the best if each has a 1/4 hex shank. But unfortunately, many have SQUARE shanks of different sizes, which makes it very inconvenient.
Just use flathead screwdriver and hammer and u can get it out
It was just a broken bolt, now the gasket face is f#€ked
can you do on the small screw
Phony example
My boss does this and makes it look so easy.. I still haven't mastered the broken bolt thing yet. vise grips help but only if you have something to bite on.
Thank you now i can fix my own minibike
Engine
The following is what I got, some used:
1. "RYOBI Spiral Screw Extractor Set (5-Piece)" — I used one piece of it, it worked. The thread was worn after being used only once. But it's still OK. I recommend.
2. "CRAFTSMAN CMMT14108 Spiral Screw Extractor" — this I haven't used. It's the same as the Ryobi kind. I recommend.
3. "IRWIN Screw Extractor for Spiral Screws, 5-Piece (53535)" — this I have used — the thread was not so much worn after being used once. This kind seems better than RYOBI and CRAFTSMAN. I recommend.
4. "Irwin Hanson 53702 7/64" Spiral Screw Extractor & Drill Bit Set" — I haven't used it. But I think it's good.
5. "Hanson Irwin 53701 5/64" Spiral Screw Extractor & Drill Bit Set" — I haven't used it. But I think it's good.
6. "12-Piece Screw Extractor Set Easy Out Remover Kit of the B BOSI TOOLS Store". They are totally useless. My don't recommend.
Those at the good one
What if it’s like way deeper in and way smaller
Left hand drill bits…
weld a nut
What is the names of this tools
Man, i had your clip playing on repeat in the background as this stubborn bolt was extracted. Im not familiar with the music or even the language but as that bokt came undone it was beautiful 😊
We all know easy outs rarely ever work… So you better make sure you drill that hole damn center.. so you can tap it out to the regular size
Name of this tool ?
I'm just here for the music.
That's the best ive seen thank you.
Good luck getting the gasket to seal with that gouge out of the mating surface
tool name
What's the hand tool called?
Why does these Japanese song slap tho lol
❤❤❤
This is called a screw extraction tool or set 👍
Yeah… but what if the broken bolt is small like a water pump bolt?
Scary pain
Great job I'm learning to become a pro like urself.
May the gods help me learn new things always
That’s what you get when it’s made in china 🇨🇳💁🏽♂️
Dremel should have been used! Now he gets to send the block out to be professionally machined. Hope this is NOT your mechanic!!!
Almost as soothing as watching ear wax removal
What happens if the bolt extractor bit also breaks off ?
What is that drill bit set called to get the bolts removed
I just learned something here… I know how to extract but like to watch videos….. I’m 31 and just now realizing you can put that extractor bolt right into an air gun?…..
Bolt is sitting in loose
what drill is that