🚴‍♂️ How to Use a Puncture Repair Kit 💥

Learn how to quickly fix a flat with the Weldtite Airtite Puncture Repair Kit. Featuring durable, feather-edged Airtite patches, it securely seals punctures in seconds and ensures a long-lasting fix that lasts the lifetime of your inner tube.

#optimisedbyweldtite #cycling #bikelife #biketech #workshopwednesday

how to use our airtight puncher repair kit once you remove the tube from the tire the first step is to put some air in the tube and see if you can hear where the air is escaping from you just want to put the tube up to your ear and have a listen and see if you can hear the air so on this tube it’s leaking just here i’ll just put my finger over that to mark where it is so the next step is just to get the sandpaper out the kit and roughen the area around the puncture this is just going to help with the patch adhering to the tube so now we’re going to get the rubber solution from the kit and we’re going to place it onto the inner tube around the puncher you then want to spread it out evenly you can do that either with your finger with the back of the patch kit and you want the rubber solution to be wider than the patch itself then just leave the rubber solution for around 1 minute to dry and become tacky now carefully remove the full backing from the patch and place it onto the tube you want to make sure to center the patch over the hole and pick a patch that’s large enough to cover the puncture so once the patch is on you have this clear plastic coating you can leave that on or you can take it off if you want to take it off be careful and make sure you don’t remove the patch with it some people like to leave it on because they say it reduces friction and protects the patch