Share.

3 Comments

  1. Ok, don’t panic.

    First, make sure that the quick release or through axle (the bit that fixes the wheel into the fork) is properly installed and fastened tight.

    If it is, check spoke tension. Starting on one side of the wheel, squeeze a pair of spikes between your thumb and forefinger. Now the next pair and the next, until you have moved around that side of the wheel 360°. Now do the same on the other side. Do all the spokes feel the same? Are some loose compared to others? If the latter, the wheel needs the attention of a bike shop, urgently.

  2. RareBad1372 on

    You could also put the wheel in backwards, tighten down the quick release and see if the wheel leans the same direction, or the opposite direction.

    Opposite lean = wheel problem

    same lean = fork problem

    But I would guess your axle is just not seated all the way up in the fork dropouts.

Leave A Reply