Penetrating oil on what’s left of the nut, then hold the nut with vice grips and unscrew.
ThatGothGuyUK on
Two pairs of “Plumbers Pliers” and a lot of force or a hacksaw to cut the bolt.
Or a bolt splitter.
Naive-Needleworker37 on
If you can find replacement, just cut the bolt and replace. The nut seems like it is damaged anyway
umgrybab on
Stick it in the oven for an hour at 100 deg C, and then pull it out and drive the fastener into an ice cube. Then hit it with a quick shot of penetrating oil to prevent any galling, and it should unscrew.
6 Comments
Try some wd40 and let it work
Penetrating oil on what’s left of the nut, then hold the nut with vice grips and unscrew.
Two pairs of “Plumbers Pliers” and a lot of force or a hacksaw to cut the bolt.
Or a bolt splitter.
If you can find replacement, just cut the bolt and replace. The nut seems like it is damaged anyway
Stick it in the oven for an hour at 100 deg C, and then pull it out and drive the fastener into an ice cube. Then hit it with a quick shot of penetrating oil to prevent any galling, and it should unscrew.
Quit messing around, Cut that bolt. Lol