Share.

2 Comments

  1. 2017-2018 frame if I’m correct. Wheelset from a lesser known maker, but still an upgrade from the Mavic Aksium that are normally supplied.

    Components I’m not so sure are original to the bike and might not necessarily be considered an “upgrade”: Stem – I believe this is supposed to be a Cannondale C1 stem. Seatpost – HiMods came with Hollowgram carbon seatposts which are absolutely amazing. Crank arms and chainring – normally this would be Cannondale SpideRing and SiSL2 crank arms. These I consider to be one my favorite components of all time. Quite a bit lighter than Ultegra at the time.
    Now some builds were sold w/ FSA K-Force components which are not present here.

    Is it worth 2k? Mayyybe. It’s a Hi-Mod frame after all. But is it that much better than a standard Super Six frame of the same time? It’s questionable. I own both and they feel pretty much identical. It’s a full Ultegra group set and not a mishmash like some bikes posted here, so 👍 on that.
    The bike also looks to be in pretty decent condition.
    I would ask to inspect the bottom bracket if possible. Evo’s used the pf30/pf30a which could get notoriously squeaky/grindy if not installed and serviced properly.

    I would push maybe for 1600 knowing there’s some components that I would immediately bin. I’d pay 2k if I would be looking not make any alterations and ride it as is.

  2. Improvedandconfused on

    I’m going to say know. The groupset, although Ultegra, is a couple of generations old (r 6800) dating the bike to about 2015-16.

    For 2 grand you should be able to get something newer with di2.

Leave A Reply