If the threads are okay, a crank puller. If not a hacksaw might be useful. But a hammer or whatever brute force instrument that will permanently destroy the bb and the crank will do just fine.
Excellent day,You need center key or extractor manufacture key whith center and do the measurement
ptfuzi on
Just use a mallet and pull them. Btw why they look so hammered?
maddyeti on
When in doubt, just hammer the hell out of it😢
Slightly_Effective on
I’d put the hammer down because that’s not working. Then get a square taper bottom bracket tool, a spanner to use it with and watch a video on removing cranks using a crank extractor. Good luck!
mcg00b on
If you can still ride it, go around the block until the cranks fall off. Douse in WD40 or some penetrating oil first.
SelectionStatus9739 on
The threat is gone far beyond use so what do u rekon i use to get them off i want to pegs on the bike
10 Comments
Crank puller
If the threads are okay, a crank puller. If not a hacksaw might be useful. But a hammer or whatever brute force instrument that will permanently destroy the bb and the crank will do just fine.
[https://www.parktool.com/en-us/product/crank-puller-for-square-taper-cranks-ccp-22](https://www.parktool.com/en-us/product/crank-puller-for-square-taper-cranks-ccp-22)
Excellent day,You need center key or extractor manufacture key whith center and do the measurement
Just use a mallet and pull them. Btw why they look so hammered?
When in doubt, just hammer the hell out of it😢
I’d put the hammer down because that’s not working. Then get a square taper bottom bracket tool, a spanner to use it with and watch a video on removing cranks using a crank extractor. Good luck!
If you can still ride it, go around the block until the cranks fall off. Douse in WD40 or some penetrating oil first.
The threat is gone far beyond use so what do u rekon i use to get them off i want to pegs on the bike
Prayer.