Goes back in, you may need to rotate the cassette/free hub side as you slide it on, to get the teeth engaged.
kesho_san on
Slide the cassette and freehub body onto the hub axle while rotating counter clockwise. You may need to push the pawls in with a pick as you rotate
_drelyt on
You can use a zip tie upside down. As in, not tightening or engaging the zip tie but backwards and depress the pawls. Once depressed, it will slide in partially. Then remove the zip tie carefully and it will go all the way in.
AddendumDifferent381 on
Wrap the pawls in ptfe tape, then pull that out once it’s in, rotate the cassette clockwise as you install it back into its housing.
4 Comments
Goes back in, you may need to rotate the cassette/free hub side as you slide it on, to get the teeth engaged.
Slide the cassette and freehub body onto the hub axle while rotating counter clockwise. You may need to push the pawls in with a pick as you rotate
You can use a zip tie upside down. As in, not tightening or engaging the zip tie but backwards and depress the pawls. Once depressed, it will slide in partially. Then remove the zip tie carefully and it will go all the way in.
Wrap the pawls in ptfe tape, then pull that out once it’s in, rotate the cassette clockwise as you install it back into its housing.