If you’re riding hard enough to break a frame like this, you probably would have broken any other aluminum frame, sooner or later.
GANGofFOURSTAR on
was it held together with electrical tape like the driveside?
_40oz_ on
OP, I think its story time.
BlackLangster on
Can we get more context lmao
Sincerely: an engine11 rider
Ungreasedaxle45again on
“So much torque, the frame twisted coming off the line. Barely kept her on the track.” Aah picture.
9ZENEK3 on
Something that gives me hope about riding cheaper builds. I’ve never had anything like this happen. Please help! me I’m poor, spare some change?
pumpkinmeerkat on
mtb crankset on there?
sarcazmos on
Engine 1
420Deez on
why you cut it
NoFuture412 on
What kind of Wheels do you have I remember watching a YouTube video on BMX roots on Mongoose BMX and in the video they talked about how a lot of beach cruiser frames f***** up a lot because of the Mongoose Motomags.
I used to have a size 56 engine 11 crit d with a rear 90 mm notorious rim well, it depends on your riding style if you’re doing any tricks and riding off of curbs (So did I) therefore that’s on you but otherwise man I don’t know.
velo_dude on
Um. Steel Is Real?
scalloprisotto on
This picture is from South Korea right? The place where kids literally do not care about their bikes and abuse them hard (not bc they ride hard). Plenty of broken aluminium frame in SKR
themodernyouth on
that’ll buff right out
Dr_666_ on
regardless these are cheap frames
bacoes on
I wonder if the chain might have been super tight from a chain tensioner that caused the original stress point.
20 Comments
How the hell did that happen?
never seen this happen to a steel bike….
Just aluminum doing aluminum things.
If you’re riding hard enough to break a frame like this, you probably would have broken any other aluminum frame, sooner or later.
was it held together with electrical tape like the driveside?
OP, I think its story time.
Can we get more context lmao
Sincerely: an engine11 rider
“So much torque, the frame twisted coming off the line. Barely kept her on the track.” Aah picture.
Something that gives me hope about riding cheaper builds. I’ve never had anything like this happen. Please help! me I’m poor, spare some change?
mtb crankset on there?
Engine 1
why you cut it
What kind of Wheels do you have I remember watching a YouTube video on BMX roots on Mongoose BMX and in the video they talked about how a lot of beach cruiser frames f***** up a lot because of the Mongoose Motomags.
I used to have a size 56 engine 11 crit d with a rear 90 mm notorious rim well, it depends on your riding style if you’re doing any tricks and riding off of curbs (So did I) therefore that’s on you but otherwise man I don’t know.
Um. Steel Is Real?
This picture is from South Korea right? The place where kids literally do not care about their bikes and abuse them hard (not bc they ride hard). Plenty of broken aluminium frame in SKR
that’ll buff right out
regardless these are cheap frames
I wonder if the chain might have been super tight from a chain tensioner that caused the original stress point.
Weight weenies be like…
Think I’ll stick to steel
Too many watts