Found a few 'clean' solutions to mount your Garmin/Wahoo computer and made use of the rear screws on the new seat post for you Varia!
First up the rear mount used is from a German company called 4Frames heres the link:
https://www.4-frames.de/products/sp-mount#
I added a small amount of cloth tape into the mount insert to give it a slightly tighter fit. Should help with all the road vibrations its going to put up with.
Really clean look and uses up the screw holes on the new SP0077 seat post that i didn't want to leave exposed!
Next up the front mount. It's just the standard Gear Groove mount but i believe this to be stronger than 3d printed alternatives. I've added a GoPro style mount to the underside allowing me to use an insta360 camera or a light if I need.
Heres the link:
https://sloperoad.com/sr-canyon-gear-groove-to-gopro-adapter
All in all I think these are some of the neatest and minimal mounts I've come across to add lights/cameras and accessories.
Not too much info out there so theres my 2cents!
by radxwatson