In my last post, I talked about a problem I had a problem with bushing sizing on the DNM coil,
(the bushing size 12mm which is different from industry standard 12.7mm).
I got it fixed!
Basically just sanded the original DNM insert to fit the original Levo bushing,
As for the flip chip being 12.7mm!
I got lucky!
It was as simple as cutting down one of the stock DNM bushing to size,
as they where the same inner diameter 😙. left some pics for anyone interested 😊.
My only concern not is that the rebound dial🔴
Does not affect rebound!?
From what I was told the rebound has to be set from the shim stack as a “fixed setting”!
Would you guys know any seals, pistons and shims that would match this shock(DNM
Burner RCP-2S)
Anywho thanks for any help.😅
by Affectionate-Job-375