I’m wondering if this drivetrain will fit onto a propain tyee 6 much newer geo. I mean this drivetrain just works. I don’t have any need to upgrade until it stops working. What do you think? I’m not sure if the crank spindle is too short or if anything will fit properly. I do know the rear wheel will fit. And it has UDH.
Help me out!
by Important-Positive25
2 Comments
Probably not. I have a 2017 process. Pressfit bb, 142 rear axle and a standard derailleur hangar. Hopefully your new frame doesn’t have the 142 axle and pressfit. Udh is up for debate
The wheels won’t fit due to different spacing. The cranks also won’t fit. Never reuse a press fit BB. The shifters, derailleur will work. Yes, you can hang any derailleur off an UDH. The brakes will work obviously work. Gonna need a new rear hose as the frame will be much longer and you will lose a few inches when you cut the old olive from the lever side.
Honestly, GX or SLX 12 speed is so cheap, just buy everything new. Then you could at least get a few hundred bucks for the old bike that still runs. Or keep it as a spare.