If the logo peels off will it affect the performance of the bibs?
queen_ravenx on
completely unwearable that flap is gonna mess with your aero and result in at least 20 watt loss. Return asap!!!
hiro111 on
Take a piece of thick paper or (ideally) parchment paper, place it on top of the logo and run a dry, hot iron over it lightly. That will re-adhere the logo.
Ol_Man_J on
Personally, I’d pull it off and pretend it never was there
kittencalledmeow on
I would just pull it off and then go ride in them.
HamsterbackenBLN on
I would return them, you got something new this shouldn’t be a thing
Pawly519 on
Just take it off. Maybe contact them and see what they say. I had the same thing happen with a logo from NEOPRO but the bibs were fine.
It’s likely just the process they used to apply the logos didn’t cure properly.
Mihsan on
You will not fix this. It is done with the wrong tech – you never wanna use transfer glue on a synthetic fabrics, which is done in this case (glue always gives out with stretching, washing, wear, ect.; it is less of a problem with cotton).
If it does not leave any residue or trace and looks fine w/o logo – I would say keep it. If not – return.
samuraijon on
it’s cosmetic.
you could run an iron on low heat and reactivate the adhesive, use fabric glue or use an iron on hemming tape.
BD59 on
Brand new? Heck yes, return them.
Mission-Candy1178 on
People here are memeing over this because it’s obviously cosmetic, but for a garment in this price range, I would 100% reach out to the vendor for compensation/replacement.
InternationalCode14 on
Bit early for the logo to be peeling, we’re they expensive and are they a good brand?
12 Comments
If the logo peels off will it affect the performance of the bibs?
completely unwearable that flap is gonna mess with your aero and result in at least 20 watt loss. Return asap!!!
Take a piece of thick paper or (ideally) parchment paper, place it on top of the logo and run a dry, hot iron over it lightly. That will re-adhere the logo.
Personally, I’d pull it off and pretend it never was there
I would just pull it off and then go ride in them.
I would return them, you got something new this shouldn’t be a thing
Just take it off. Maybe contact them and see what they say. I had the same thing happen with a logo from NEOPRO but the bibs were fine.
It’s likely just the process they used to apply the logos didn’t cure properly.
You will not fix this. It is done with the wrong tech – you never wanna use transfer glue on a synthetic fabrics, which is done in this case (glue always gives out with stretching, washing, wear, ect.; it is less of a problem with cotton).
If it does not leave any residue or trace and looks fine w/o logo – I would say keep it. If not – return.
it’s cosmetic.
you could run an iron on low heat and reactivate the adhesive, use fabric glue or use an iron on hemming tape.
Brand new? Heck yes, return them.
People here are memeing over this because it’s obviously cosmetic, but for a garment in this price range, I would 100% reach out to the vendor for compensation/replacement.
Bit early for the logo to be peeling, we’re they expensive and are they a good brand?