Can any of you help me find this bike computer mount, or even a 3D model of it?
This seems to come from a Streek (or Stroke) cargo trike, but all I’ve been able to find is a couple photos of it. This setup would be perfect for something I’m wanting to do, but I’m not keen on drawing it all by hand and would be happy to purchase it as well.
Thanks!
R5Jockey on
I’m so confused… what are we even looking at?
panchikoluvr on
it looks like an out-front mount that’s been installed backwards
MikieJag on
Could probably grab a Garmin mount, reverse it and swap the top mount for the bottom mount. Some of them have the screw holes on both side.
Or if you have the printer already, could actually print whatever you want by mixing and matching, rotating.
adv_cyclist on
While I don’t have one specifically like that in the photo, I have a number of bikes with computer mounts behind the bars. I use stem spacer mounts like the ones from K-Edge. It replaces a stem spacer that you then secure your top cap down onto and mount your computer between the steerer and bar.
282492 on
A cheap garmin stem mount w/ the elastic bands solves your problem. Weighs almost nothing, super simple and cheap. Doesn’t interfere with anything (no bolts) can’t come lose or rattle, basically indestructible. Having the computer angled with the stem is no issue for visibility
People get so creative with fancy and expensive stem mounts that basically add nothing from this simple design
6 Comments
Can any of you help me find this bike computer mount, or even a 3D model of it?
This seems to come from a Streek (or Stroke) cargo trike, but all I’ve been able to find is a couple photos of it. This setup would be perfect for something I’m wanting to do, but I’m not keen on drawing it all by hand and would be happy to purchase it as well.
Thanks!
I’m so confused… what are we even looking at?
it looks like an out-front mount that’s been installed backwards
Could probably grab a Garmin mount, reverse it and swap the top mount for the bottom mount. Some of them have the screw holes on both side.
Or if you have the printer already, could actually print whatever you want by mixing and matching, rotating.
While I don’t have one specifically like that in the photo, I have a number of bikes with computer mounts behind the bars. I use stem spacer mounts like the ones from K-Edge. It replaces a stem spacer that you then secure your top cap down onto and mount your computer between the steerer and bar.
A cheap garmin stem mount w/ the elastic bands solves your problem. Weighs almost nothing, super simple and cheap. Doesn’t interfere with anything (no bolts) can’t come lose or rattle, basically indestructible. Having the computer angled with the stem is no issue for visibility
People get so creative with fancy and expensive stem mounts that basically add nothing from this simple design