Dented top tube near seat tube. I just use this for bike rides on smooth bike paths. Bought this used so not sure how the dent happened. Seems like if I chip away the paint there’s no cracking in the aluminum. Just wondering if it’s safe for basic riding.
by TingGreaterThanOC
8 Comments
The bike may be rideable, but then again, it may be compromised. It’s cheaper to replace the frame than your teeth (or worse). Trek gives 20% off for crash replacements (even if you aren’t the original owner). I would look into this.
From what I understand top tube usually takes the least force. So this is probably fine for normal riding
Is there any other form of damage on the frame? It looks like something may have fallen onto the bike and caused that dent. if that’s the case it’s probably nothing to worry about for the time being. if there was velocity involved with creating that dent I’d be a little more concerned. I’m fresh to biking so take it with a grain of salt but from what I know of metal and being an overly cautious person, that’s my take.
Being aluminum, you’re ok. If it was carbon, it would be game over
It’s probably safe but if you can afford to replace it that’s probably the best bet.
That’s like 10 watts of aero inefficiency! (j/k — it’s aluminum and the top tube — it’s ugly but likely not a structural problem)
Eso no es bueno mi amigo.
its fine. if you want to get carried away, take it to metal and bond some carbon around the tube