Me again, so… i cant figure out how to get the Shifters of the Bullbar, since the curve is too narrow much to slide them off. Do i have to take them apart completely? I would like to not destroy them but to use them ob the new handle I bought.
The brake levers are narrow enough to slide them off.
by That_Tart_7318
9 Comments
Some (terrifying) drop bars with gripshifts are made in 2 pieces that join under the stem faceplate
time for everybody’s favourite solution: forced upgrade
Try removing the grip part, could make it short enough to rotate around the bar.
On many grip shifters if you completely remove the little set screw for the clamp the entire metal clamp part will come out of the shifter. I still think you will have to force it a bit, and it will very likely crack the plastic.
This can be disassembled and removed. That’s how it got on there in the first place
I did this once a long time ago. You need to remove the grip. Underneath you will find that the barrel around which the grip rotates has a slit in it (cut by the tech who installed these). That allows the whole thing to get around the turn.
these suck to take apart but they do come apart and should slide in two or three pieces
Cut the bar?
Grip shifters suck destroy em lol