Close Menu
    Brompton Folding Bicycle

    How to transport a peli case?

    Share.
    View 5 Comments

    5 Comments

    1. a0ba5e5c8fd122566f79 on

      Just think about the 16“ wheel diameter. Your short site is 11“, that ain’t work.
      Try a Peli 1640.

      Edit: sorry, my brain added a „in a peli“, which is the usual question here.
      You may be able to add a front carrier block receiver to the small peli. Get this part either printed or cnc‘ed, depending on your box weight and bolt it on.
      https://www.thingiverse.com/thing:132096

      My be able to find it online pre printed on ebay or similar.

    2. TsukimiUsagi on

      Vertically on a rear rack? I’m not sure how comfortable that would be and you’d need to pay close attention to weight limits, but it might work.

      Depending on the outer dimensions (I believe the photo is showing inner dimensions) it might fit on a [Burley Travoy](https://burley.com/products/travoy). A pricey trailer but it works well.

    3. Loud_Step2361 on

      How heavy is the toolbox fully loaded? If 20lbs or less, might be rack mountable or as another redditor (a0ba5e5c8fd122566f79) mentioned converted into a front bag with an adapter. 

      https://www.ebay.com/itm/335377833939

      If over 20lbs, I would recommend a bike trailer that has an adapter to connect to the seat post such as Burley Travoy Trailer or Wike Golf/Utility bike trailer.

    4. blp9 on

      [https://imgur.com/94x6rzS](https://imgur.com/94x6rzS) (but maybe ratchet straps)

      Keep in mind that the front carrier block is specified to 10kg and the 1510 is 5.4kg empty.

      I think there are some beefy rear racks that could take it, but it’s going to overhang a bunch.

      Editing to add more thoughts: it’s worth noting I did this with an empty case and it felt really awkward.

    5. HaziHasi on

      put the case in a trailer and pull it. or Burley Travoy and strap it on the trailer but check the dimension

    Leave A Reply