Hello everyone,
I am riding Scott Addict RC 15 in size XL. The stack of this bike is 588 and I am using 50mm of spacers coming to 538 in total. I used to take bike fit and since I am 193cm with huge inseam (97 cm) the fitter recommended me to buy the bike with total stack + spacers 675mm (+37mm of total stack compared to Scott).
I am thinking of purchasing Canyon Endurance CF SLX in size XL. This bike has 637mm stack with 15mm of spacers and that will get me to 652. But it looks like to me that after 15mm of spacers there is EP1580-01 spacer that moves the handlebar more than 652mm upward. I would like to know is this is the true, and if so, how much this spacer increases the stack height? I am attaching the picture of the dimension I need to know
Thanks.
by SlobaRS
3 Comments
Canyon’s endurance bike is called the **Endurace**.
*I am a bot, and this action was performed automatically. Please [contact the moderators of this subreddit](/message/compose/?to=/r/CanyonBikes) if you have any questions or concerns.*
On Canyon site you have stack+ data. I can see it is 717mm for this model. This includes all components. Also under component geometry you have spacers listed at 27,5mm
As the other comment said, forget about stack+spacers, and instead use stack+ and reach+, which are measured to the top of the tops of the handlebar. Canyon provides the data, and you can measure yourself your current fit.
Stack+ and Reach+ in the charts are given with all removable spacers installed, i.e. 1.5cm. You can then assume you can lower it by ~1.5cm if you wanted to.
You CANNOT add any further spacers on CP0018.