hey, i need some advice:
about 11 months ago I decided to upgrade a crank set on my first fixed gear bike. It is sram rival 1 attached to truvativ sram gxp team bottom bracket. It was fine in the beginning but recently it started to move little bit when i push on the cranks 🙁
Is there something i could do to prevent it from happening or maybe they're just bad for a fixed drivetrain?
Thanks in advance for your help, have a nice day!
loose sram rival 1 crankset :/
byu/Bartkowyyy inFixedGearBicycle
by Bartkowyyy
2 Comments
I’ve got a force1 on my fixie. Had a similar issue. I took the crank off and tightened the Allen screws on the back. That’s where the play was. It took several years and a couple thousand miles for it to start doing it. This happened recently so I don’t know if the fix worked long term or if it’s going to be a recurring issue.
I had something similar happen on some Aliexpress cranks; cranks moved a little but chainring didn’t. I tightened down the three screws that lock in the chainring and it fixed it.