So basically I have been having nothing but issues with this bike since I put my 3 piece crank on been getting a crackle vibration no sound with it when pedaling hard and today I was hand pedaling my bike slowly upside down and realize the chain was hitting the teeth on my cassette slightly before slipping into the right spot causing the vibration. I think when I first took this rear wheel off the hub spun quite a bit inside cause it was all so tight. So I want to know is this amount of space normal in the first picture compared to the second picture of the hub on my drive side. There’s a large bit more of spacing on this left side and it’s concerning me. I’ve tried 3 chains it’s not the chain or cranks, it’s the hub. Any idea how I could adjust this with a crescent wrench? Or something? I can’t figure it out my cassette cog is just slightly crooked I’m pretty sure
by Fast_Hold5211