Facebook Twitter LinkedIn Pinterest Bluesky Threads RIP… any ideas to get the bolt out? by beachsunflower Bicycle Bicycle Motocross Bicycling Bike Biking BMX Cycling
brianbmx94 on June 1, 2024 1:53 pm Try to carefully grab that exposed end with a vice grips and thread her through.
FloridaCelticFC on June 1, 2024 2:05 pm If you can get a tight grasp on the end with some vice grips…. or cut a slot into the end with a dremel and turn it with a flathead screwdriver.
halapeno-popper on June 1, 2024 2:59 pm Cut it all the way, debur bothe ends in the middle if you can and drill them out with a left handed drill bit.
6 Comments
Try to carefully grab that exposed end with a vice grips and thread her through.
If you can get a tight grasp on the end with some vice grips…. or cut a slot into the end with a dremel and turn it with a flathead screwdriver.
Tap and die
Maybe cut the bolt in that open middle area.
Vise Grips
Cut it all the way, debur bothe ends in the middle if you can and drill them out with a left handed drill bit.