Facebook Twitter LinkedIn Pinterest Bluesky Threads Low clearance of rear disc rotor by Tajgeer Bicycling Bike Bike Repair Biking Cycling Repair
Tajgeer on April 20, 2024 11:34 am As a follow-up to my previous post about Rival AXS and BB: [https://www.reddit.com/r/bikewrench/comments/1c5jz28/specialized_diverge_e5_rival_dub_wide_or_should_i/](https://www.reddit.com/r/bikewrench/comments/1c5jz28/specialized_diverge_e5_rival_dub_wide_or_should_i/) I’ve received my wheel from manufacturer after conversion from Shimano MTB hub to XDR one and noticed “pretty” small clearance. It’s a 6-bolt variant. Obviously it’s not rubbing against the frame, the wheel is spinning freely. Clearance is clearance in this case?
slebolve on April 20, 2024 11:56 am That’s a bit too close. I had small distance between spokes and break calliper. So manufacturers say at least 5mm, people on the internet say 2-3mm.
RECAR77 on April 20, 2024 12:59 pm can you verify that the hub is actually 142mm wide (in case it came with an incorrect end cap?)
4 Comments
As a follow-up to my previous post about Rival AXS and BB: [https://www.reddit.com/r/bikewrench/comments/1c5jz28/specialized_diverge_e5_rival_dub_wide_or_should_i/](https://www.reddit.com/r/bikewrench/comments/1c5jz28/specialized_diverge_e5_rival_dub_wide_or_should_i/)
I’ve received my wheel from manufacturer after conversion from Shimano MTB hub to XDR one and noticed “pretty” small clearance. It’s a 6-bolt variant.
Obviously it’s not rubbing against the frame, the wheel is spinning freely. Clearance is clearance in this case?
That’s a bit too close. I had small distance between spokes and break calliper. So manufacturers say at least 5mm, people on the internet say 2-3mm.
can you verify that the hub is actually 142mm wide (in case it came with an incorrect end cap?)
Missing an endcap?