The compressor works fine with regular Schrader valves on my other bicycles but, on my MTB with presta valves with the adapter, it just doesn’t want to work!
Also, when I [use the inflation gun alone](https://youtu.be/JHOgYsmuOII?si=DJdun8xclmd7ACP8) (video), I can use it to deflate the tire without any problem.
How can I use it with the compressor?
*BTW, at first, the gauge on the inflation gun shows about 40 psi because I ride with high pressure for the street.*
Help! My Schrader valve adapter doesn’t want to work with my compressor.
byu/Caterpillar1967 inMTB
by Caterpillar1967
3 Comments
That connection requires the valve pin in the schrader valve to push against a pin to move air. You may need to do some hackery or get a different inflator tool.
Are you just seating the bead? If so pull the valve and pump it full of air until you get your three pops, then remove the chuck – reinstall the valve – and inflate by hand
Screw the presta nut in halfway, it’s too far out