Hi all,
A few years ago I purchased a [Giant TCR Advanced 2 Disc](https://ivanhoecycles.com.au/products/giant-tcr-advanced-2-2022) which has been an incredible ride! Really enjoying it. I would like to now upgrade the stock wheelset to some cheaper Chinese EliteWheels Carbon wheels.
I found an EliteWheels ENT Disc series listing which has the rims, and I think this is the correct specs to buy:
– 50mm depth 25mm
– Clincher Tubeless
– Wheel Depth: QRx100 QRx135 or 12×100 12×142 (preferred), current P-R2 wheels say they fit both so the TCR could fit either?
– Shimano 11S
– 6-pin Lock (seems to be what I can see on the bike, but perhaps it is a Centre Lock)
I’d love to get some thoughts if the above fits, or if another model is recommended.
I noted these are the ENT models recommended by Trace Velo, but I can see that the Marvel model is well recommended on this forum too. Thanks for the help!
by mynameishwil
1 Comment
Take some photos of your current wheel hubs.
Assuming it’s through axle (you pull out the axle to take off the wheels) and not quick release(the axles can stay in the hub and only need to be loosened), you probably want F 12×100, R 12×142. The 6 bolt vs center lock depends on which disc rotors you have.